This oxygen analyzer is intended for continuous monitoring of the concentration of
oxygen being delivered to patients ranging from newborns to adults.
It can be used in the hospital and sub-acute settings
Oxygen Analyzer, Handheld, Electrochem
Measurement Range 0% to 100%
Display Resolution 0.10%
Response Time 90% of final value < 15 seconds at 23 °C
Warm-up Time None required
Cable Length 10 ft when fully extended
Calibration Reminder One week timer; restarted every calibration
Weight < 1.5 lbs (680 grams)
Min/Max Storage Temperature -15 °C to 50 °C (5 °F to 122 °F)
Operating Temperature 15 °C to 40 °C (59 °F to 104 °F)
Dimensions 3.6˝x 5.8˝x 1.2˝(91 mm x 147 mm x 30 mm)
Power Requirements Four (4) AA alkaline batteries (4 x 1.5 volts)
Alarm System High/low alarm system, flashing yellow LEDs, nominal 975 Hz audio buzzer
Linearity +/- 1% of full-scale at constant temperature and pressure
Accuracy +/- 1% of full-scale at constant temperature, relative humidity, and pressure
ISO 13485
DIRECTIVE 93/42/EEC or FDA
The User Manual supplied with the device details all operation procedures for user.
2 years